Filter
Second filter
Third filter
Fourth filter

Breadboards & Cables

In this category you will find all the breadboards and cables that we offer. We are sure that you will find a combination that suits you here.

Showing all 24 results

Sort by:
Mini breadboard
Mini breadboard

Mini breadboard for beginners or for fast prototyping.

The colors on offer are green, blue, red, white and black. We send them out randomly so you could get any of them. If you prefer a specific one, leave a message with your order letting us know which one and we’ll try to fulfill your wish. 🙂

Breadboard
Breadboard

A breadboard is a piece of equipment that anyone who works with electronics must have. It enables connecting components and modules without soldering and in that way provides simpler testing, prototyping and learning. This breadboard is inside our Dasduino Beginner Kit.

 

Large breadboard
Large breadboard

A breadboard is a piece of equipment that anyone who works with electronics must have. It enables connecting components and modules without soldering and in that way provides simpler testing, prototyping and learning.

 

Set of cables for breadboard, 65 pieces
Set of cables for breadboard, 65 pieces

Set of cables that are used for connecting to the breadboard. The set contains 65 cables that are in different colors and lengths for easier recognition on the breadboard.

Set of male-female cables, 40 pieces
Set of male-female cables, 40 pieces

Set of male-female cables for connecting to various modules and components. You simply connect the module to the breadboard. It contains 40 cables of different colors, wire length is 15cm.

 

• Quantity: 40 cables
• Cable length: 15cm
• different colors for easier recognition

Set of female-female cables, 40 pieces
Set of female-female cables, 40 pieces

Set of female-female cables for connections with various modules and components.

 

Quantity: 40 cables
Cable lenght: 15cm
• different colors for easier recognition

Set of small cables for a PCB, U-shaped, 140 pcs
Set of small cables for a PCB, U-shaped, 140 pcs

Set of cables designed to connect to the experimental board. These wires aren’t as flexible as our classic set of cables and they are cut in a variety of lengths. Using these wires, your breadboard will look very neat!

10x cables with aligator clips
10x cables with aligator clips

This set of cables makes component conjugation when prototyping or testing much faster and easier. Set consists of 10 cables that have alligator connection on each end so you could hook it to any component easily. Moreover, your work will be even simpler because of different cable colors in the set.

 

USB to USB-C cable
USB to USB-C cable

High-quality USB-C male to classic USB-A male cable 100cm long, with all communication and power lines.

 

Connector side A: USB-A male
• Connector side B: USB-C male
• Length: 1m

 

USB to USB-C cable, 3m
USB to USB-C cable, 3m

High-quality USB-C male to classic USB-A male cable 300cm long, with all communication and power lines.

 

Micro USB cable 0.6m
Micro USB cable 0.6m

The classic Micro USB cable which fits most modern Android smartphones, but also our new development boards.

 

USB mini-B cable 0.5m
USB mini-B cable 0.5m

USB, 0.5m long, mini-B type cable (just like the connection on the Croduino Basic2) – actually it is the same as the one that comes with Basic2 board. It is not a micro-USB so it does not fit to smartphones.

 

USB-C to USB-C cable
USB-C to USB-C cable

High quality USB-C male to USB-C male cable. It is 100cm long, with all communication and power lines.

 

Connector side A: USB-C male
• Connector side B: USB-C male
• Length: 1m

 

easyC cable 6cm
easyC cable 6cm

easyC is the system for simple connection of microcontroller boards, sensors, and actuators which allows fast prototyping without the possibility of error. The connection between modules occurs with simple and pre-assembled cables, and easyC modules have connectors corresponding to the cables. easyC is based on the I2C communication.

This product is easyC compatible cable with easyC connectors on both ends. Cable lenght is 6cm.

easyC cable with female headers
easyC cable with female headers

This easyC cable exposes all the pins on the easyC connector. Using this cable, any easyC board can be connected to an experimental board or vice versa.

JST female connector with cable
JST female connector with cable

JST (more precisely JST XH) connectors are today the most common connectors for rechargeable lithium batteries but are also used for many other applications where a fast, easy and convenient connection is required.

 

Exact name: JST XH 2pin
Mounting method: cable
The distance between pins: 2.00mm
Female connector

easyC cable 50cm
easyC cable 50cm

easyC system is for easy connection of microcontroller plates, sensors and actuators, which enables rapid prototyping without the possibility of error. The connection between the modules takes place with simple and pre-prepared cables, and easyC modules have connectors that fit the cables. easyC is based on I2C communication.

This product is easyC compatible cable, with easyC connectors on both sides lenght 50cm.

Breadboard power supply board
Breadboard power supply board

If you need a simple and stable power source for your breadboard projects, this board is here to help. Supply it with DC jack DC power or using UCB-C cable, and the board provides 3.3V, 5V or 12V directly to the power supply lines on the breadboard. Output voltages are adjustable seperately using the onboard switches. There’s a power LED, a power switch and an automatic voltage selection circuit, in case both power inputs are there.

easyC cable 10cm
easyC cable 10cm

easyC system is for easy connection of microcontroller plates, sensors and actuators, which enables rapid prototyping without the possibility of error. The connection between the modules takes place with simple and pre-prepared cables, and easyC modules have connectors that fit the cables. easyC is based on I2C communication.

This product is easyC compatible cable, with easyC connectors on both sides lenght 10cm.

2x red and black alligator cable
2x red and black alligator cable

Cable with classic “Crocodile” (crocodile or alligator connectors) for power supply connection or any other two signals.

USB power supply to alligator cable
USB power supply to alligator cable

Cable with classic “Crocodile” (crocodile or alligator connectors) on one end and a USB connector on the other end to connect on USB type of power supply.

easyC cable 20cm
easyC cable 20cm

easyC system is for easy connection of microcontroller plates, sensors and actuators, which enables rapid prototyping without the possibility of error. The connection between the modules takes place with simple and pre-prepared cables, and easyC modules have connectors that fit the cables. easyC is based on I2C communication.

This product is easyC compatible cable, with easyC connectors on both sides lenght 20cm.

Male DC connector to alligator cable
Male DC connector to alligator cable

Cable with classic “Crocodile” (crocodile or alligator connectors) on one end and a male 2.1mm DC connector on the other end for power supply connection.

2x Alligator to banana cable
2x Alligator to banana cable

If you use some laboratory equipment such as power source, signal generators or, in most cases, multimeters – you’ll find this cable very practical. It has 2 banana connectors – on one end so you could connect it to mentioned devices and on another end to connect it to alligator connector which allows you to connect to almost anything!

items per page