Filter
Second filter
Third filter
Fourth filter

Switches

Here you will find all the switches we offer. Built-in switches and buttons in colors, panel key switch and sliding switches are just some of the offer.

Showing all 20 results

Sort by:
SPST panel box switch 17x13mm
SPST panel box switch 17x13mm

SPST (single-pole, single-throw) is a simple switch that connects or disconnects the two contacts in its casing.

 

Type: SPST
Shape: box
Max. current/voltage: 250VAC 10A
• Dimensions: 17mm x 13mm x 11mm (without contacts)

SPST panel switch 24x21mm
SPST panel switch 24x21mm

SPST (single-pole, single-throw) is a simple switch that connects or disconnects the two contacts in its casing.

 

Type: SPST
Shape: elongated
Max. current/voltage: 250VAC 10A

Panel switch, 12mm, red lighting
Panel switch, 12mm, red lighting

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

 

 

Panel switch, 12mm, blue lighting
Panel switch, 12mm, blue lighting

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

 

Panel switch, 12mm, white lighting
Panel switch, 12mm, white lighting

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

Panel switch, 12mm, green lighting
Panel switch, 12mm, green lighting

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

 

Panel key switch
Panel key switch

This interesting product enables you to control who has is allowed to turn on or turn off a circuit. Namely, in order to change the status of this switch, you need to put the key in the lock and turn it around.

 

 

DPDT panel switch
DPDT panel switch

Large DPDT (Dual Pole Dual Throw) panel mount switch. Breaks two wires simultaneously.

 

 

Out of stock Magnetic door / window switches
Magnetic door / window switches

These magnetic door switch sensors are already seen, if not – then in old movies for sure where they were used as anti-theft devices, ie. alarm systems. In fact, it is a magnet and the reed switch inside a pair. When they are close to each other (recommended 13mm or less), reed switch closes. Connect it to Croduino / Arduino as an ordinary switch use the detection of open doors, windows, drawers, cupboards etc.

 

• Voltage: max. 200V, best used 5V Croduino/Arduino
• Max reed power: 100mA
• Max detection distance: 15mm, 13mm recommended
• Dimensions: 29 x 14 x 9mm
• Cable length: 30cm

Reed switch
Reed switch

Reed switch is a switch that is activated within the range of the magnetic field. Within its glass capsule, it has two metal wires that will move when they are near the magnet and thus “activate” switch.

KIP switch
KIP switch

SPDT (single-pole, dual-throw) is a simple switch that connects the centre contact to one of the other two contacts located on its housing.

 

DIP switch, 2 way
DIP switch, 2 way

The DIP switch is a small switch that is simply used with breadboard or protoboard.

Number of poles: 2
Pitch: (2.54mm)

DIP switch, 5 way
DIP switch, 5 way

The DIP switch is a small switch that is simply used with breadboard or protoboard.

Number of poles: 5
Pitch: (2.54mm)

SPDT THT switch for breadboard
SPDT THT switch for breadboard

SPDT (single-pole, dual-throw) is simple switch which connects central contact with one of the other two contacts located inside its housing.

SPDT THT switch angular
SPDT THT switch angular

SPDT (single-pole, dual-throw) is simple switch which connects central contact with one of the other two contacts located inside its housing.

 

Switch DPDT SS22D03L5
Switch DPDT SS22D03L5

DPDT (Dual Pole Dual Throw) for PCB mounting. Disconnects two poles simultaneously.

SPDT slide switch
SPDT slide switch

SPDT (single-pole, dual-throw) is a simple sliding switch that connects the central contact with one of the other two contacts in its housing.

 

Microswitch KW12-3
Microswitch KW12-3

KW12-3 is a standard microswitch – it’s activated by the external force on the lever. Releasing the force we deactivate it. This system is very quick and practical, it allows dynamic changes in the switch. The lever itself is able to rotate – it has a little wheel on the top. Microswitches like these are used in PC mouses, automobile industry, communication devices, microwave oven doors etc.

Emergency stop button
Emergency stop button

All real machines have an emergency stop button when pressed the whole machine stops. It can be very useful in case of the danger of someone working on that machine. If you want to install a similar thing on your project, here it is!

Type: DPST
Maximal voltage: 660V
Maximal current: 10A
Button diameter: 40mm
Mounting hole diameter: 22mm
• Dimensions: 60 x 70mm

Pedal switch
Pedal switch

The pedal switch allows you to activate a hands-free device, which may be handy for equipment and machines that require both hands. The switch is push-button-like and creates a connection when the foot is held down by the pedal. On the back of the pedal is a rubber pad to prevent the pedal from sliding.

 

items per page