Filter
Second filter
Third filter
Fourth filter

Resistors

This category includes the resistors we offer. For example THT and SMD resistors, potentiometers or resistor kits can be found here.

Showing all 22 results

Sort by:
Resistor kit 400
Resistor kit 400

How many times were You working on a project and You were missing that one resistor of a certain value? Set of resistors is something that will certainly come in handy to anyone who works with electronics. It offers 20 different resistors whose combinations can give us almost any necessary resistance. Each value comes in 20 samples, all packed up in a practical pocketbook. It even has 0 ohm resistors!

 

20 values x 20 pcs = 400 pcs of resistors
• Practical packaging 

Potentiometer 10k THT
Potentiometer 10k THT

Potentiometer of variable resistance of 10k which can be used on an experimental board, but it can also be installed in the housing. They can be used for various types of control, eg. Setting how the brightness of LEDs.

Potentiometer 100k THT
Potentiometer 100k THT

A 100k variable resistance potentiometer that fits the breadboard, but can also be built into the case due to the increased size. They can be used for various types of control, eg. adjusting how bright the LED is.

Potentiometer 500k THT
Potentiometer 500k THT

A 500k variable resistance potentiometer that fits the experimental board, but can also be built into the housing due to its increasing size. They can be used for various types of control, eg adjusting how bright the LED is.

Potentiometer 1M THT
Potentiometer 1M THT

A 1M variable resistance potentiometer that fits the breadboard, but can also be built into the case due to the increased size. They can be used for various types of control, eg. adjusting how bright the LED is.

Caps for THT potentiometer
Caps for THT potentiometer

Caps for THT potentiometer from our store that would make control much easier and would simply just look better.

Potentiometer 10k
Potentiometer 10k

Potentiometer with mutable resistance from 10k that corresponds with the breadboard. They can be used for various kinds of control, for example adjusting the intensity of LED lights. One of these is also in our Dasduino Beginner Kit.

Potentiometer RV24YN20S 10k
Potentiometer RV24YN20S 10k

RV24YN20S Potentiometer with variable resistance of 10k intended for housing installation. Comes with cap and dial. Carbon, usually used to adjust the speed of rotation of the motor on the inverter.

 

Set 0402 SMD resistors, 8500 pieces
Set 0402 SMD resistors, 8500 pieces

Are you repairing or developing electronic boards? This set of resistors is incredibly useful because you will never have to think again if you have that specific resistor. It consists of 170 different values each of which comes in an amount of 50 pieces. The resistors are manufactured by YAEGO, 1% tolerance and 0402.

 

Package: 0402
Tolerance: 1%
• 50 pcs of 170 values = 8500 pcs
Resistance values[ohm]:

0, 1, 10, 100, 1K, 10K, 100K, 1M, 10M
1.1, 11, 110, 1.1K, 11K, 110K, 1.1M
1.2, 12, 120, 1.2K, 12K, 120K, 1.2M
1.3. 13, 130, 1.3K, 13K, 130K, 1.3M
1.5, 15, 150, 1.5K, 15K, 150K, 1.5M
1.6, 16, 160, 1.6K, 16K, 160K, 1.6M
1.8, 18, 180, 1.8K, 18K, 180K, 1.8M
2, 20, 200, 2K, 20K, 200K, 2M
2.2, 22, 220, 2.2K, 22K, 220K, 2.2M
2.4, 24, 240, 2.4K, 24K, 240K, 2.4M
2.7, 27, 270, 2.7K, 27K, 270K, 2.7M
3, 30, 300, 3K, 30K, 300K, 3M
3.3, 33, 330, 3.3K, 33K, 330K, 3.3M
3.6, 36, 360, 3.6K, 36K, 360K, 3.6M
3.9, 39, 390, 3.9K, 39K, 390K, 3.9M
4.3, 43, 430, 4.3K, 43K, 430K, 4.3M
4.7, 47, 470, 4.7K, 47K, 470K, 4.7M
5.1, 51, 510, 5.1K, 51K, 510K, 5.1M
5.6, 56, 560, 5.6K, 56K, 560K, 5.6M
6.2, 62, 620, 6.2K, 62K, 620K, 6.2M
6.8, 68, 680, 6.8K, 68K, 680K, 6.8M
7.5, 75, 750, 7.5K, 75K, 750K, 7.5M
8.2, 82, 820, 8.2K, 82K, 820K, 8.2M
9.1, 91, 910,. 9.1K. 91K, 910K

Photoresistor (LDR)
Photoresistor (LDR)

A photoresistor is a type of resistor that changes its resistance depending on a light that falls on it. They are super simple for making something that is needed to keep track of the amount of the light(for example, it turns the light on when it is dark).

Slider potentiometer breakout
Slider potentiometer breakout

Potentiometers are well known all around, and the sliding potentiometer is just one of its versions. You’ve probably seen it in some music equipment, and now you have the chance to add it to your project!

 

• Type: linear
• Resistance: 10k
• Dimensions: 86 x 22 mm

15x 10k resistor (pull-up/pull-down)
15x 10k resistor (pull-up/pull-down)

15x 10k resistor (pull-up/pull-down)

25x 330ohm resistor (for LEDs)
25x 330ohm resistor (for LEDs)

25x 330ohm resistor (for LEDs)

Resistor 0603 10k ohm
Resistor 0603 10k ohm

Resistor 0603 10k ohm with precision of 5%.

Shunt resistor 10A
Shunt resistor 10A

The Shunt Resistor is a special type of resistor with small resistance which allows large currents to pass through it. This is useful for measuring the current in a circuit: due to the Ohm’s law and voltage drop on the shunt resistor, we can know exactly which current passes through it. For example, for this resistor whose maximum current is 10A, the voltage drop at that current will be exactly 75mV (0.075V). Using a precise ADC, we can accurately measure the current of our consumer or power source.

 

Max. current: 10A
Voltage drop for max. current: 75mV
Dimensions: 120mm x 25mm

Resistor 0603 100kohm 5%
Resistor 0603 100kohm 5%

0603 resistor 100k ohm with 5% tolerance.

Resistor 0603 1k ohm
Resistor 0603 1k ohm

Resistor 0603 1k ohm with precision of 5%.

Resistor 0603 330ohm 5%
Resistor 0603 330ohm 5%

0603 resistor 330 ohm with 5% tolerance.

Otpornik 0603 4,7k ohm
Otpornik 0603 4,7k ohm
0603 SMD resistor set, 8500 pieces
0603 SMD resistor set, 8500 pieces

Are you repairing or developing electronic boards? This set of resistors is incredibly useful because you will never have to think again if you have that specific resistor. It consists of 170 different values each of which comes in an amount of 50 pieces. The resistors are manufactured by YAEGO, 1% tolerance and 0603.

 

Package: 0603
Tolerance: 1%
• 50 pcs of 170 values = 8500 pcs
Resistance values[ohm]:

0, 1, 10, 100, 1K, 10K, 100K, 1M, 10M
1.1, 11, 110, 1.1K, 11K, 110K, 1.1M
1.2, 12, 120, 1.2K, 12K, 120K, 1.2M
1.3. 13, 130, 1.3K, 13K, 130K, 1.3M
1.5, 15, 150, 1.5K, 15K, 150K, 1.5M
1.6, 16, 160, 1.6K, 16K, 160K, 1.6M
1.8, 18, 180, 1.8K, 18K, 180K, 1.8M
2, 20, 200, 2K, 20K, 200K, 2M
2.2, 22, 220, 2.2K, 22K, 220K, 2.2M
2.4, 24, 240, 2.4K, 24K, 240K, 2.4M
2.7, 27, 270, 2.7K, 27K, 270K, 2.7M
3, 30, 300, 3K, 30K, 300K, 3M
3.3, 33, 330, 3.3K, 33K, 330K, 3.3M
3.6, 36, 360, 3.6K, 36K, 360K, 3.6M
3.9, 39, 390, 3.9K, 39K, 390K, 3.9M
4.3, 43, 430, 4.3K, 43K, 430K, 4.3M
4.7, 47, 470, 4.7K, 47K, 470K, 4.7M
5.1, 51, 510, 5.1K, 51K, 510K, 5.1M
5.6, 56, 560, 5.6K, 56K, 560K, 5.6M
6.2, 62, 620, 6.2K, 62K, 620K, 6.2M
6.8, 68, 680, 6.8K, 68K, 680K, 6.8M
7.5, 75, 750, 7.5K, 75K, 750K, 7.5M
8.2, 82, 820, 8.2K, 82K, 820K, 8.2M
9.1, 91, 910,. 9.1K. 91K, 910K

 

Shunt resistor 50A
Shunt resistor 50A

The Shunt Resistor is a special type of resistor with small resistance which allows large currents to pass through it. This is useful for measuring the current in a circuit: due to the Ohm’s law and voltage drop on the shunt resistor, we can know exactly which current passes through it. For example, for this resistor whose maximum current is 50A, the voltage drop at that current will be exactly 75mV (0.075V). Using a precise ADC, we can accurately measure the current of our consumer or power source.

 

Max. current: 50A
Voltage drop for max. current: 75mV
Dimensions: 120mm x 25mm

30x 100kohm resistor 5% 1/4W
30x 100kohm resistor 5% 1/4W

100k ohm THT resistor with 5% tolerance and power of 1/4W.

Comes in a pack of 30 pieces.

items per page