Name Croduino Damba
Price
€4.75
  • Buy 10 for €4.27 each and save 10%
  • Buy 100 for €3.80 each and save 20%
(for 1 pc)
SKU100071

Availability: In stock

Croduino Damba is our, so far, smallest Croduino/Arduino compatible board. With dimensions 22 x 26 mm, it fits any pocket and can be easily hidden. Since it contains CR1220 battery, it is portable and can work „on the go“. It is based on attiny85 microcontroller that is adjusted to work on Arduino code and allows You about 6.5kB of space for Your code.


Nevertheless, for programming this microcontroller board You will need Croduino Basic. Programming itself is simple since there is a connection on the Damba that You just plug in into the Basic and You are ready for setting up You code. Detailed list of possibilities and features of Croduino Damba:



  • Dimensions 22 x 26mm

  • With attiny85 microcontroller that provides 6 digital outputs, 2 of them are PWM, 4 analog entrances, a possibility of SPI or I2C communication

  • Internal oscillator frequency 1MHz or 8MHz, a possibility of connecting external oscillator frequency 20MHz

  • Works on 2.7V to 5.5V

  • On the back is housing for the CR1220 battery that makes Damba transitive

  • Orange LED light on the D0 code

  • Simple programming by connecting to the Basic (upute)

  • 6.5kB for Arduino code, 0.5kB SRAM, 0.5 EEPROM

  • Made in Croatia


With Croduino Damba comes small CR1220 battery, a 10uF capacitor for programming and 3x 6-pin header for programming(soldered) and connecting on the breadboard(non-soldered).


How to start using Damba and how to upload it look up here.


o


Hi-resolution picture of Damba's pinout

OR
Description

Croduino Damba is our, so far, smallest Croduino/Arduino compatible board. With dimensions 22 x 26 mm, it fits any pocket and can be easily hidden. Since it contains CR1220 battery, it is portable and can work „on the go“. It is based on attiny85 microcontroller that is adjusted to work on Arduino code and allows You about 6.5kB of space for Your code.

Nevertheless, for programming this microcontroller board You will need Croduino Basic. Programming itself is simple since there is a connection on the Damba that You just plug in into the Basic and You are ready for setting up You code. Detailed list of possibilities and features of Croduino Damba:

  • Dimensions 22 x 26mm
  • With attiny85 microcontroller that provides 6 digital outputs, 2 of them are PWM, 4 analog entrances, a possibility of SPI or I2C communication
  • Internal oscillator frequency 1MHz or 8MHz, a possibility of connecting external oscillator frequency 20MHz
  • Works on 2.7V to 5.5V
  • On the back is housing for the CR1220 battery that makes Damba transitive
  • Orange LED light on the D0 code
  • Simple programming by connecting to the Basic (upute)
  • 6.5kB for Arduino code, 0.5kB SRAM, 0.5 EEPROM
  • Made in Croatia

With Croduino Damba comes small CR1220 battery, a 10uF capacitor for programming and 3x 6-pin header for programming(soldered) and connecting on the breadboard(non-soldered).

How to start using Damba and how to upload it look up here.

o

Hi-resolution picture of Damba's pinout

QUANTITY DISCOUNT
172
€31.50
€28.00
Available in stock
10+ units
100+ units
SHIPPING & RETURNS

We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).

Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.

Description

Details

Croduino Damba is our, so far, smallest Croduino/Arduino compatible board. With dimensions 22 x 26 mm, it fits any pocket and can be easily hidden. Since it contains CR1220 battery, it is portable and can work „on the go“. It is based on attiny85 microcontroller that is adjusted to work on Arduino code and allows You about 6.5kB of space for Your code.

Nevertheless, for programming this microcontroller board You will need Croduino Basic. Programming itself is simple since there is a connection on the Damba that You just plug in into the Basic and You are ready for setting up You code. Detailed list of possibilities and features of Croduino Damba:

  • Dimensions 22 x 26mm
  • With attiny85 microcontroller that provides 6 digital outputs, 2 of them are PWM, 4 analog entrances, a possibility of SPI or I2C communication
  • Internal oscillator frequency 1MHz or 8MHz, a possibility of connecting external oscillator frequency 20MHz
  • Works on 2.7V to 5.5V
  • On the back is housing for the CR1220 battery that makes Damba transitive
  • Orange LED light on the D0 code
  • Simple programming by connecting to the Basic (upute)
  • 6.5kB for Arduino code, 0.5kB SRAM, 0.5 EEPROM
  • Made in Croatia

With Croduino Damba comes small CR1220 battery, a 10uF capacitor for programming and 3x 6-pin header for programming(soldered) and connecting on the breadboard(non-soldered).

How to start using Damba and how to upload it look up here.

o

Hi-resolution picture of Damba's pinout

Additional Information

Additional Information

pcs No
discount No
Sale No
quantity for 1 pc
Project1 Open-source files
project-link1 https://github.com/e-radionicacom/Croduino-Damba-Eagle-Files
Project2 Schematics
project-link2 https://github.com/e-radionicacom/Croduino-Damba-Eagle-Files/blob/master/v1.0/Croduino%20Damba%20Schematic.pdf
Project3 Fritzing part: Croduino Damba
project-link3 https://e-radionica.com/fritzing/Croduino%20Damba.fzpz
Tutorial1 How to program?
tutorial_link1 https://e-radionica.com/en/blog/how-to-program-croduino-damba/
Tutorial2 Graphic pinout
tutorial_link2 https://e-radionica.com/croduino/damba-pinout.jpg
Tutorial3 No
tutorial_link3 No