Name Croduino NOVA
Price
€20.22
  • Buy 10 for €18.20 each and save 10%
  • Buy 20 for €16.17 each and save 20%
  • Buy 50 for €14.15 each and save 30%
  • Buy 200 for €10.11 each and save 50%
(for 1 pc)
SKU100026

Availability: In stock

Croduino NOVA is microcontroller board capable of connecting to WiFi Internet network. It is based on very popular ESP8266 which struggled as a standalone device. With NOVA, just plug the board into a USB port and start programming your next Internet-connected project(IoT)! Besides that, the board fits perfectly into a breadboard so prototyping is even more simple. Connecting the physical world to the internet was never easier. 


 


The brain of NOVA is ESP8266 produced by Espressif. It comes with complete WiFi(client and server side) and integrated TCP/IP stack which supports DNS. The most important thing - it is programmable from Arduino, there is even no need to manually reset the board due to auto-reset circuit onboard. It works at 80MHz frequency, has 1MB of flash for your code(of which 0.8MB available to you) and 82kB of RAM memory(of which 49kB available to you). NOVA also supports I2C, SPI and serial communication, there is 9 GPIO for you of which all support PWM and 1 analog input. Additionally, there is onboard: CP2102 USB to UART bridge (used for USB communication), 3.3V voltage regulator, 4 LEDs, it has FCC and CE certificate etc. 


 


• ESP8266 in ESP-12 package
• 80MHz, 1MB flash, 82kB RAM
• programmable from Arduino IDE!
• 9 GPIO pins of which all support PWM
• 1 analog input(ADC), max. voltage 1V and 5V
• I2C, SPI, serial communication
• CP2102 USB to UART bridge with micro USB connector
• 3.3V voltage regulator
• LEDs: power, tx, rx, GPIO13
• automatical hardware reset before uploading the code
• two pushbuttons: reset and GPIO0
• FCC and CE certificates for ESP-12

OR
Description

Croduino NOVA is microcontroller board capable of connecting to WiFi Internet network. It is based on very popular ESP8266 which struggled as a standalone device. With NOVA, just plug the board into a USB port and start programming your next Internet-connected project(IoT)! Besides that, the board fits perfectly into a breadboard so prototyping is even more simple. Connecting the physical world to the internet was never easier. 

 

The brain of NOVA is ESP8266 produced by Espressif. It comes with complete WiFi(client and server side) and integrated TCP/IP stack which supports DNS. The most important thing - it is programmable from Arduino, there is even no need to manually reset the board due to auto-reset circuit onboard. It works at 80MHz frequency, has 1MB of flash for your code(of which 0.8MB available to you) and 82kB of RAM memory(of which 49kB available to you). NOVA also supports I2C, SPI and serial communication, there is 9 GPIO for you of which all support PWM and 1 analog input. Additionally, there is onboard: CP2102 USB to UART bridge (used for USB communication), 3.3V voltage regulator, 4 LEDs, it has FCC and CE certificate etc. 

 

• ESP8266 in ESP-12 package
• 80MHz, 1MB flash, 82kB RAM
• programmable from Arduino IDE!
• 9 GPIO pins of which all support PWM
• 1 analog input(ADC), max. voltage 1V and 5V
• I2C, SPI, serial communication
• CP2102 USB to UART bridge with micro USB connector
• 3.3V voltage regulator
• LEDs: power, tx, rx, GPIO13
• automatical hardware reset before uploading the code
• two pushbuttons: reset and GPIO0
• FCC and CE certificates for ESP-12

QUANTITY DISCOUNT
192
€134.10
€119.20
€104.30
€74.50
Available in stock
10+ units
20+ units
50+ units
200+ units
SHIPPING & RETURNS

We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).

Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.

Description

Details

Croduino NOVA is microcontroller board capable of connecting to WiFi Internet network. It is based on very popular ESP8266 which struggled as a standalone device. With NOVA, just plug the board into a USB port and start programming your next Internet-connected project(IoT)! Besides that, the board fits perfectly into a breadboard so prototyping is even more simple. Connecting the physical world to the internet was never easier. 

 

The brain of NOVA is ESP8266 produced by Espressif. It comes with complete WiFi(client and server side) and integrated TCP/IP stack which supports DNS. The most important thing - it is programmable from Arduino, there is even no need to manually reset the board due to auto-reset circuit onboard. It works at 80MHz frequency, has 1MB of flash for your code(of which 0.8MB available to you) and 82kB of RAM memory(of which 49kB available to you). NOVA also supports I2C, SPI and serial communication, there is 9 GPIO for you of which all support PWM and 1 analog input. Additionally, there is onboard: CP2102 USB to UART bridge (used for USB communication), 3.3V voltage regulator, 4 LEDs, it has FCC and CE certificate etc. 

 

• ESP8266 in ESP-12 package
• 80MHz, 1MB flash, 82kB RAM
• programmable from Arduino IDE!
• 9 GPIO pins of which all support PWM
• 1 analog input(ADC), max. voltage 1V and 5V
• I2C, SPI, serial communication
• CP2102 USB to UART bridge with micro USB connector
• 3.3V voltage regulator
• LEDs: power, tx, rx, GPIO13
• automatical hardware reset before uploading the code
• two pushbuttons: reset and GPIO0
• FCC and CE certificates for ESP-12

Additional Information

Additional Information

pcs No
discount No
Sale No
quantity for 1 pc
Project1 What is NOVA?
project-link1 https://e-radionica.com/en/blog/meet-croduino-nova/
Project2 Open-source Files
project-link2 https://github.com/e-radionicacom/Croduino-NOVA-Eagle-Files
Project3 Schematics
project-link3 https://github.com/e-radionicacom/Croduino-NOVA-Eagle-Files/blob/master/v1.0/Croduino%20Nova%20Schematic.pdf
Tutorial1 How to program?
tutorial_link1 https://e-radionica.com/en/blog/how-to-program-croduino-nova-from-arduino-ide/
Tutorial2 Graphic pinout
tutorial_link2 https://e-radionica.com/croduino/nova_pinout.jpg
Tutorial3 How to open webpage with NOVA?
tutorial_link3 https://e-radionica.com/en/blog/croduino-nova-as-a-clienta-k-a-how-to-open-web-page-with-croduino-nova/