Name Croduino NOVA2
Price
€17.50
(for 1 pc)
SKU222067

Availability: In stock

The Croduino NOVA2 is a microcontroller board with the ability to connect to a WiFi network and the Internet! It is based on an already well-known ESP8266 which is otherwise quite complicated to use on its own. With Nova, simply connect the board to USB and start programming your next IoT project. In addition, the microcontroller boards ideally suited for breadboard, which makes prototyping is even faster. Connecting the physical world with the internet has never been easier.


 


The brain of these boards is already mentioned Espressif's ESP826. Comes with full WiFi (both client and server side) and an integrated TCP / IP stack that supports DNS! Most importantly - programmable from Arduino IDE, there is no need to manually reset the board. The 80MHz frequency processor has as much as 1MB of space for your code (0.8MB available, bootloader 0.2MB) and 82kB of RAM (of which you can use 49kB). The board supports I2C, SPI and serial communications and has 9 GPIO pins, all of which support PWM and one analog input. In addition to the above, the board uses CH340 as a USB 2.0 interface, 3.3V voltage regulator, 4 LEDs, FCC and CE certificate, and a lot more. There is also an easyC connector on the board, which allows easy connection of various devices (available in e-radionica's offer) with a board. Finally, there is a standard JST lithium-ion connector for your project to be truly wireless. When you need to charge a battery, just plug in the USB cable and charge the battery with the integrated charger on the board.


 


• ESP8266 in the ESP-12 package
• 80MHz, 1MB flash, 82kB RAM
• Programmable from Arduino IDE!
• 9 GPIO pins, all of which support PWM
• 1 analog input (ADC), max. voltage 1V and 5V
• I2C, SPI, serial communication
• CH340 USB to UART bridge with micro USB connector
• 3.3V voltage regulator
• LED diodes for power supply, tx, rx, and GPIO13
• hardware auto-reset when uploaded
• two pushbuttons: reset and GPIO0
• FCC and CE Certificates for ESP-12

OR
TUTORIALS

LINKS

Description

The Croduino NOVA2 is a microcontroller board with the ability to connect to a WiFi network and the Internet! It is based on an already well-known ESP8266 which is otherwise quite complicated to use on its own. With Nova, simply connect the board to USB and start programming your next IoT project. In addition, the microcontroller boards ideally suited for breadboard, which makes prototyping is even faster. Connecting the physical world with the internet has never been easier.

 

The brain of these boards is already mentioned Espressif's ESP826. Comes with full WiFi (both client and server side) and an integrated TCP / IP stack that supports DNS! Most importantly - programmable from Arduino IDE, there is no need to manually reset the board. The 80MHz frequency processor has as much as 1MB of space for your code (0.8MB available, bootloader 0.2MB) and 82kB of RAM (of which you can use 49kB). The board supports I2C, SPI and serial communications and has 9 GPIO pins, all of which support PWM and one analog input. In addition to the above, the board uses CH340 as a USB 2.0 interface, 3.3V voltage regulator, 4 LEDs, FCC and CE certificate, and a lot more. There is also an easyC connector on the board, which allows easy connection of various devices (available in e-radionica's offer) with a board. Finally, there is a standard JST lithium-ion connector for your project to be truly wireless. When you need to charge a battery, just plug in the USB cable and charge the battery with the integrated charger on the board.

 

• ESP8266 in the ESP-12 package
• 80MHz, 1MB flash, 82kB RAM
• Programmable from Arduino IDE!
• 9 GPIO pins, all of which support PWM
• 1 analog input (ADC), max. voltage 1V and 5V
• I2C, SPI, serial communication
• CH340 USB to UART bridge with micro USB connector
• 3.3V voltage regulator
• LED diodes for power supply, tx, rx, and GPIO13
• hardware auto-reset when uploaded
• two pushbuttons: reset and GPIO0
• FCC and CE Certificates for ESP-12

QUANTITY DISCOUNT
563
Available in stock
SHIPPING & RETURNS

We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).

Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.

Description

Details

The Croduino NOVA2 is a microcontroller board with the ability to connect to a WiFi network and the Internet! It is based on an already well-known ESP8266 which is otherwise quite complicated to use on its own. With Nova, simply connect the board to USB and start programming your next IoT project. In addition, the microcontroller boards ideally suited for breadboard, which makes prototyping is even faster. Connecting the physical world with the internet has never been easier.

 

The brain of these boards is already mentioned Espressif's ESP826. Comes with full WiFi (both client and server side) and an integrated TCP / IP stack that supports DNS! Most importantly - programmable from Arduino IDE, there is no need to manually reset the board. The 80MHz frequency processor has as much as 1MB of space for your code (0.8MB available, bootloader 0.2MB) and 82kB of RAM (of which you can use 49kB). The board supports I2C, SPI and serial communications and has 9 GPIO pins, all of which support PWM and one analog input. In addition to the above, the board uses CH340 as a USB 2.0 interface, 3.3V voltage regulator, 4 LEDs, FCC and CE certificate, and a lot more. There is also an easyC connector on the board, which allows easy connection of various devices (available in e-radionica's offer) with a board. Finally, there is a standard JST lithium-ion connector for your project to be truly wireless. When you need to charge a battery, just plug in the USB cable and charge the battery with the integrated charger on the board.

 

• ESP8266 in the ESP-12 package
• 80MHz, 1MB flash, 82kB RAM
• Programmable from Arduino IDE!
• 9 GPIO pins, all of which support PWM
• 1 analog input (ADC), max. voltage 1V and 5V
• I2C, SPI, serial communication
• CH340 USB to UART bridge with micro USB connector
• 3.3V voltage regulator
• LED diodes for power supply, tx, rx, and GPIO13
• hardware auto-reset when uploaded
• two pushbuttons: reset and GPIO0
• FCC and CE Certificates for ESP-12

Additional Information

Additional Information

pcs No
discount No
Sale No
quantity for 1 pc
Project1 No
project-link1 No
Project2 No
project-link2 No
Project3 No
project-link3 No
Tutorial1 No
tutorial_link1 No
Tutorial2 No
tutorial_link2 No
Tutorial3 No
tutorial_link3 No