Description
Looking to add visuals to your Arduino projects? The I2C OLED breakout board is perfect for that. Because of its high contrast, you will be in awe of its crispness! The display is made from hundreds of LEDs, each representing one pixel in a 128x64 grid. Thus, it doesn't need any backlight, and it needs less power than the classic LCD screens. That’s 8192 pixels all individually lit at your fingertips!
The design is 5V ready with an onboard regulator, so is compatible with any 3.3V board. The breakout board uses only about 20 mA, depending on active pixels. It is easy to control over the I2C interface. It is even easier to connect with the easyC system - no soldering required!
Screen diagonal: 0.96" wide
Dimensions: 30 mm x 30 mm
Current consumption: ~20 mA (depending on active pixels)
Logic voltage level: 5V (on I2C header)
Operating voltage: 5V (onboard regulator for 3.3V)
Communication: I2C (address: 0x3C)
Connectors: easyC x2
Pixel color: white
Mounting holes: 2
Tier Pricing
30
Available in stock
SHIPPING & RETURNS
We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).
Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.
- Description
-
Details
Looking to add visuals to your Arduino projects? The I2C OLED breakout board is perfect for that. Because of its high contrast, you will be in awe of its crispness! The display is made from hundreds of LEDs, each representing one pixel in a 128x64 grid. Thus, it doesn't need any backlight, and it needs less power than the classic LCD screens. That’s 8192 pixels all individually lit at your fingertips!
The design is 5V ready with an onboard regulator, so is compatible with any 3.3V board. The breakout board uses only about 20 mA, depending on active pixels. It is easy to control over the I2C interface. It is even easier to connect with the easyC system - no soldering required!
Screen diagonal: 0.96" wide
Dimensions: 30 mm x 30 mm
Current consumption: ~20 mA (depending on active pixels)
Logic voltage level: 5V (on I2C header)
Operating voltage: 5V (onboard regulator for 3.3V)
Communication: I2C (address: 0x3C)
Connectors: easyC x2
Pixel color: white
Mounting holes: 2 - Additional Information
-
Additional Information
quantity for 1 pc Project1 No project-link1 No Project2 No project-link2 No Project3 No project-link3 No Tutorial1 No tutorial_link1 No Tutorial2 No tutorial_link2 No Tutorial3 No tutorial_link3 No
Comment and Review