Description
This microcontroller board allows communication with LoRa protocol via ESP32 microcontroller. ESP32 is a powerfull microcontroller with WiFi and bluetooth 4.0 (BLE), and all that while it works on 240MHz with 2 cores. Its memory contains 520kB of RAM and 4MB flash memory. This board even has a specific place for our NOVA programmer which allows easier and fast programming via Arduino IDE.
Except ESP32 there is also RFM95W LoRa transciver. Thanks to it this board can send and recieve data from LoRa gateway or from the other board like this. To reach maximum distance there is an SMA connector to connect your antennas. Board has a connector and charger for a standard li-ion battery. A very important thing about LoRa is the low power consumption, and this board definitely makes it possible: the power consumption in the sleep state is only 5μA.
This board comes with soldered easyC adapter and enables simple connections. You can find more about easyC at this link.
• Microcontroller: ESP32
• Memory: 4MB flash, 520kB RAM
• Lithium battery charger
• Current in deep sleep: 5μA
• LoRa frequency: 868MHz (Europe)
• Voltage: 3.3V
• Dimensions: 75 x 26 x 7.5mm
Tier Pricing
12
Available in stock
SHIPPING & RETURNS
We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).
Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.
- Description
-
Details
This microcontroller board allows communication with LoRa protocol via ESP32 microcontroller. ESP32 is a powerfull microcontroller with WiFi and bluetooth 4.0 (BLE), and all that while it works on 240MHz with 2 cores. Its memory contains 520kB of RAM and 4MB flash memory. This board even has a specific place for our NOVA programmer which allows easier and fast programming via Arduino IDE.
Except ESP32 there is also RFM95W LoRa transciver. Thanks to it this board can send and recieve data from LoRa gateway or from the other board like this. To reach maximum distance there is an SMA connector to connect your antennas. Board has a connector and charger for a standard li-ion battery. A very important thing about LoRa is the low power consumption, and this board definitely makes it possible: the power consumption in the sleep state is only 5μA.
This board comes with soldered easyC adapter and enables simple connections. You can find more about easyC at this link.
• Microcontroller: ESP32
• Memory: 4MB flash, 520kB RAM
• Lithium battery charger
• Current in deep sleep: 5μA
• LoRa frequency: 868MHz (Europe)
• Voltage: 3.3V
• Dimensions: 75 x 26 x 7.5mm - Additional Information
-
Additional Information
quantity for 1 pc Project1 Datasheet LoRa project-link1 https://e-radionica.com/productdata/Lora-RFM95W-868S2.pdf Project2 Datasheet ESP32 project-link2 https://e-radionica.com/productdata/ESP32-Wroom-32D.pdf Project3 No project-link3 No Tutorial1 No tutorial_link1 No Tutorial2 No tutorial_link2 No Tutorial3 No tutorial_link3 No
Comment and Review