Description
ESP8266 is an IC that delivers a true revolution in the world of makers, especially in the world of IoT (Internet of Things). This is a complete 32-bit SoC (System on Chip) with built-in flash memory, frame and EEPROM which can even be programmed directly from the Arduino interface, without the need for an additional microcontroller. With all this, the most important point is that in itself has a built-in WiFi (AP, STA, AP + STA), all that for "little money".
ESP8266 in this form (ESP-07) is suitable for direct soldering to a printed circuit board as SMD component or direct soldering wires to it since it has small holes. It also has a built-in PCB antenna and connector for an external antenna.
Note: ESP8266 is an IC that works at 3.3V! Connecting it directly to 5V, or track Arduino or Croduino plate will destroy it! Use a logic level converter!
• Voltage: 1.8V - 3.8V
• 32-bit SoC with UART, SPI, WiFi
• Frequency: 52MHz
• Ability to work with very low power consumption
• 16 additional GPIO pins
• a lot of other details
Tier Pricing
430
€8.56
€8.10
€7.74
Available in stock
10+ units
50+ units
100+ units
SHIPPING & RETURNS
We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).
Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.
- Description
-
Details
ESP8266 is an IC that delivers a true revolution in the world of makers, especially in the world of IoT (Internet of Things). This is a complete 32-bit SoC (System on Chip) with built-in flash memory, frame and EEPROM which can even be programmed directly from the Arduino interface, without the need for an additional microcontroller. With all this, the most important point is that in itself has a built-in WiFi (AP, STA, AP + STA), all that for "little money".
ESP8266 in this form (ESP-07) is suitable for direct soldering to a printed circuit board as SMD component or direct soldering wires to it since it has small holes. It also has a built-in PCB antenna and connector for an external antenna.
Note: ESP8266 is an IC that works at 3.3V! Connecting it directly to 5V, or track Arduino or Croduino plate will destroy it! Use a logic level converter!
• Voltage: 1.8V - 3.8V
• 32-bit SoC with UART, SPI, WiFi
• Frequency: 52MHz
• Ability to work with very low power consumption
• 16 additional GPIO pins
• a lot of other details - Additional Information
-
Additional Information
quantity for 1 pc Project1 Datasheet project-link1 https://www.e-radionica.com/productdata/ESP8266_Specifications_English.pdf Project2 No project-link2 No Project3 No project-link3 No Tutorial1 No tutorial_link1 No Tutorial2 No tutorial_link2 No Tutorial3 No tutorial_link3 No
Comment and Review