An oscilloscope is very useful to have nearby - it allows you to display signals depending on the time. Usual problem with oscilloscopes is that they are large and awkward to carry, but with this USB oscilloscope it is no longer a problem! Plug it into a USB port, install drivers and software, plug in the probes and measure. Using special software, you have controls over the device as on a classic desktop oscilloscope. It has 2 channels, measures up to 20MHz and takes 48 million samples per second. It comes with two probes.
If an analog approach to signal processing with an oscilloscope is not enough, (firmware developers, we hear you!) There is also a 16-channel logic analyzer. It will read signals from 0V to 5.5V on 16 channels simultaneously, displaying them on the timeline for easy analysis, so you can accurately measure the duration and decode each digital signal. The logic analyzer software even decodes the data being sent, if it is a standard communication. Comes with 16 quick signal connecting connectors.
Osciloscope
• Frequency range: 20MHz
• Channels: 2
• Sample rate: 48MSa/s
• Memory depth: 1M
• Rise time: 17.5ns
• Time division: 1ns/div - 5000s/div
• Voltage division: 20mV/div - 5V/div
Logic analyzer
• Channels: 16
• Input voltage range: 0V - 5.5V
• Maximum number of samples: 48M
• Frequency range: 10MHz
• Memory depth: 1M/CH
• Connection: USB
• Comes with s 2 PP80B probes
• Dimensions: 200 x 100 x 35mm
• Weight: 300g
We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).
Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.
- Description
-
Details
An oscilloscope is very useful to have nearby - it allows you to display signals depending on the time. Usual problem with oscilloscopes is that they are large and awkward to carry, but with this USB oscilloscope it is no longer a problem! Plug it into a USB port, install drivers and software, plug in the probes and measure. Using special software, you have controls over the device as on a classic desktop oscilloscope. It has 2 channels, measures up to 20MHz and takes 48 million samples per second. It comes with two probes.
If an analog approach to signal processing with an oscilloscope is not enough, (firmware developers, we hear you!) There is also a 16-channel logic analyzer. It will read signals from 0V to 5.5V on 16 channels simultaneously, displaying them on the timeline for easy analysis, so you can accurately measure the duration and decode each digital signal. The logic analyzer software even decodes the data being sent, if it is a standard communication. Comes with 16 quick signal connecting connectors.
Osciloscope
• Frequency range: 20MHz
• Channels: 2
• Sample rate: 48MSa/s
• Memory depth: 1M
• Rise time: 17.5ns
• Time division: 1ns/div - 5000s/div
• Voltage division: 20mV/div - 5V/divLogic analyzer
• Channels: 16
• Input voltage range: 0V - 5.5V
• Maximum number of samples: 48M
• Frequency range: 10MHz
• Memory depth: 1M/CH• Connection: USB
• Comes with s 2 PP80B probes
• Dimensions: 200 x 100 x 35mm
• Weight: 300g - Additional Information
-
Additional Information
quantity for 1 pc Project1 Manual project-link1 https://www.e-radionica.com/productdata/HT6022BL_Manual.pdf Project2 Drivers project-link2 https://www.e-radionica.com/productdata/HT6022BL_Driver.zip Project3 Software project-link3 https://www.e-radionica.com/productdata/HT6022BL_Software.zip Tutorial1 No tutorial_link1 No Tutorial2 No tutorial_link2 No Tutorial3 No tutorial_link3 No