If you’re like us, the first time you saw an e-reader, you thought to yourself, "I could do something with that." Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the contents of the screen, e-paper is uniquely suited to many applications. Following Inkplate 6 success, with Inkplate 10 we continue to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino.
To name a few features, Inkplate 10 has stunning 9.7" inch e-paper display with refresh rate of 1.61s, greyscale mode and partial updates support. Powered by ESP32, you will have strong microcontroller with WiFi and Bluetooth on your disposal. Using our Arduino library, it's 5 minute work to get the board running for you. It's 100% open-source for both software and hardware.
• a 9-7"-inch, 1200x820 pixel e-paper display with support for greyscale, partial updates, and accelerated refresh cycles
• an on-board ESP32 microcontroller with integrated Wi-Fi and Bluetooth 4.0 (BLE)
• extremely low-energy, battery- or USB-powered operation (including a 22 µA sleep state) that wrings days, weeks, or months out of a single charge, as well as charger for that battery
• a microSD card reader from which Inkplate 10 can pull images to display
• three capacitive touch pads
• a form factor that's optimized for the design of custom enclosures
• additional GPIO pins, easyC/Qwiic compatibility, and support for I²C and SPI
• Arduino libraries (100% compatible with Adafruit GFX) and a MicroPython module (work in progress!) that facilitate the rendering of text, images, and line art
• Comes with 3D printed enclosure
• Dimensions: 235 x 187 x 12mm
Inkplate 10 has been funded using Crowd Supply.
We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).
Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.
- Description
-
Details
If you’re like us, the first time you saw an e-reader, you thought to yourself, "I could do something with that." Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the contents of the screen, e-paper is uniquely suited to many applications. Following Inkplate 6 success, with Inkplate 10 we continue to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino.
To name a few features, Inkplate 10 has stunning 9.7" inch e-paper display with refresh rate of 1.61s, greyscale mode and partial updates support. Powered by ESP32, you will have strong microcontroller with WiFi and Bluetooth on your disposal. Using our Arduino library, it's 5 minute work to get the board running for you. It's 100% open-source for both software and hardware.
• a 9-7"-inch, 1200x820 pixel e-paper display with support for greyscale, partial updates, and accelerated refresh cycles
• an on-board ESP32 microcontroller with integrated Wi-Fi and Bluetooth 4.0 (BLE)
• extremely low-energy, battery- or USB-powered operation (including a 22 µA sleep state) that wrings days, weeks, or months out of a single charge, as well as charger for that battery
• a microSD card reader from which Inkplate 10 can pull images to display
• three capacitive touch pads
• a form factor that's optimized for the design of custom enclosures
• additional GPIO pins, easyC/Qwiic compatibility, and support for I²C and SPI
• Arduino libraries (100% compatible with Adafruit GFX) and a MicroPython module (work in progress!) that facilitate the rendering of text, images, and line art
• Comes with 3D printed enclosure
• Dimensions: 235 x 187 x 12mmInkplate 10 has been funded using Crowd Supply.
- Additional Information
-
Additional Information
quantity for 1 pc Project1 Open-source files project-link1 https://github.com/e-radionicacom/Inkplate-10-hardware Project2 Arduino library project-link2 https://github.com/e-radionicacom/Inkplate-Arduino-library Project3 Micropython project-link3 https://github.com/e-radionicacom/Inkplate-micropython Tutorial1 Documentation tutorial_link1 https://inkplate.readthedocs.io/en/latest/index.html Tutorial2 Getting started tutorial_link2 https://inkplate.readthedocs.io/en/latest/get-started.html Tutorial3 No tutorial_link3 No