• Worldwide Shipping

  • 24/7 Customer Support

  • FAQ
  • Worldwide Shipping

  • 24/7 Customer Support

  • FAQ
Name Inkplate 10 - 9.7" e-paper display
Price
€179.62
(za 1 kom)
SKU000026

MOQ: 1 piece

If you’re like us, the first time you saw an e-reader, you thought to yourself, "I could do something with that." Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the contents of the screen, e-paper is uniquely suited to many applications. Following Inkplate 6 success, with Inkplate 10 we continue to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino. 


 


To name a few features, Inkplate 10 has stunning 9.7" inch e-paper display with refresh rate of 1.61s, greyscale mode and partial updates support. Powered by ESP32, you will have strong microcontroller with WiFi and Bluetooth on your disposal. Using our Arduino library, it's 5 minute work to get the board running for you. It's 100% open-source for both software and hardware. What is especially interesting is that Inkplate uses recycled screens taken from old e-book readers, which is very environmentally friendly, but you have to keep in mind that some screens may have small scratches because of this. All screens with large scratches and damages are not used at all.


 


• a 9-7"-inch, 1200x820 pixel e-paper display with support for greyscale, partial updates, and accelerated refresh cycles
• an on-board ESP32 microcontroller with integrated Wi-Fi and Bluetooth 4.0 (BLE)
• extremely low-energy, battery- or USB-powered operation (including a 22 µA sleep state) that wrings days, weeks, or months out of a single charge, as well as charger for that battery
• a microSD card reader from which Inkplate 10 can pull images to display
• three capacitive touch pads
• a form factor that's optimized for the design of custom enclosures
• additional GPIO pins, easyC/Qwiic compatibility, and support for I²C and SPI
• Arduino libraries (100% compatible with Adafruit GFX) and a MicroPython module (work in progress!) that facilitate the rendering of text, images, and line art
• Comes without enclosure
Dimensions: 230 x 180 x 10mm


 


* Please note: some of the Inkplates might come without 1 piece of MCP23017 IO expander. That IC does not limit any Inkplate functionality, only reduces number of IO pins. Due to component shortage, we are having very hard time sourcing those. We are sorry for this and we will provide 10% discount with those Inkplate boards. 

OR
Description

If you’re like us, the first time you saw an e-reader, you thought to yourself, "I could do something with that." Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the contents of the screen, e-paper is uniquely suited to many applications. Following Inkplate 6 success, with Inkplate 10 we continue to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino. 

 

To name a few features, Inkplate 10 has stunning 9.7" inch e-paper display with refresh rate of 1.61s, greyscale mode and partial updates support. Powered by ESP32, you will have strong microcontroller with WiFi and Bluetooth on your disposal. Using our Arduino library, it's 5 minute work to get the board running for you. It's 100% open-source for both software and hardware. What is especially interesting is that Inkplate uses recycled screens taken from old e-book readers, which is very environmentally friendly, but you have to keep in mind that some screens may have small scratches because of this. All screens with large scratches and damages are not used at all.

 

• a 9-7"-inch, 1200x820 pixel e-paper display with support for greyscale, partial updates, and accelerated refresh cycles
• an on-board ESP32 microcontroller with integrated Wi-Fi and Bluetooth 4.0 (BLE)
• extremely low-energy, battery- or USB-powered operation (including a 22 µA sleep state) that wrings days, weeks, or months out of a single charge, as well as charger for that battery
• a microSD card reader from which Inkplate 10 can pull images to display
• three capacitive touch pads
• a form factor that's optimized for the design of custom enclosures
• additional GPIO pins, easyC/Qwiic compatibility, and support for I²C and SPI
• Arduino libraries (100% compatible with Adafruit GFX) and a MicroPython module (work in progress!) that facilitate the rendering of text, images, and line art
• Comes without enclosure
Dimensions: 230 x 180 x 10mm

 

* Please note: some of the Inkplates might come without 1 piece of MCP23017 IO expander. That IC does not limit any Inkplate functionality, only reduces number of IO pins. Due to component shortage, we are having very hard time sourcing those. We are sorry for this and we will provide 10% discount with those Inkplate boards. 

Tier Pricing
36
Available in stock
SHIPPING & RETURNS

We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).

Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.

Description

Details

If you’re like us, the first time you saw an e-reader, you thought to yourself, "I could do something with that." Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the contents of the screen, e-paper is uniquely suited to many applications. Following Inkplate 6 success, with Inkplate 10 we continue to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino. 

 

To name a few features, Inkplate 10 has stunning 9.7" inch e-paper display with refresh rate of 1.61s, greyscale mode and partial updates support. Powered by ESP32, you will have strong microcontroller with WiFi and Bluetooth on your disposal. Using our Arduino library, it's 5 minute work to get the board running for you. It's 100% open-source for both software and hardware. What is especially interesting is that Inkplate uses recycled screens taken from old e-book readers, which is very environmentally friendly, but you have to keep in mind that some screens may have small scratches because of this. All screens with large scratches and damages are not used at all.

 

• a 9-7"-inch, 1200x820 pixel e-paper display with support for greyscale, partial updates, and accelerated refresh cycles
• an on-board ESP32 microcontroller with integrated Wi-Fi and Bluetooth 4.0 (BLE)
• extremely low-energy, battery- or USB-powered operation (including a 22 µA sleep state) that wrings days, weeks, or months out of a single charge, as well as charger for that battery
• a microSD card reader from which Inkplate 10 can pull images to display
• three capacitive touch pads
• a form factor that's optimized for the design of custom enclosures
• additional GPIO pins, easyC/Qwiic compatibility, and support for I²C and SPI
• Arduino libraries (100% compatible with Adafruit GFX) and a MicroPython module (work in progress!) that facilitate the rendering of text, images, and line art
• Comes without enclosure
Dimensions: 230 x 180 x 10mm

 

* Please note: some of the Inkplates might come without 1 piece of MCP23017 IO expander. That IC does not limit any Inkplate functionality, only reduces number of IO pins. Due to component shortage, we are having very hard time sourcing those. We are sorry for this and we will provide 10% discount with those Inkplate boards. 

Additional Information

Additional Information

quantity za 1 kom
Project1 Open-source files
project-link1 https://github.com/e-radionicacom/Inkplate-10-hardware
Project2 Arduino library
project-link2 https://github.com/e-radionicacom/Inkplate-Arduino-library
Project3 Micropython
project-link3 https://github.com/e-radionicacom/Inkplate-micropython
Tutorial1 Dokumentacija
tutorial_link1 https://inkplate.readthedocs.io/en/latest/index.html
Tutorial2 Getting started
tutorial_link2 https://inkplate.readthedocs.io/en/latest/get-started.html
Tutorial3 No
tutorial_link3 No