If you’re like us, the first time you saw an e-reader, you thought to yourself, "I could do something with that." Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the contents of the screen, e-paper is uniquely suited to many applications. Following Inkplate 6 and 10 success, with Inkplate 6PLUS we continue to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino. 6PLUS adds touchscreen and frontlighting, making it a perfect solution for interactive projects.
To name a few features, Inkplate 6PLUS has stunning 6.0 inch e-paper display with refresh rate of 1.27s, greyscale mode and partial updates support. Additionally, it had touchscreen with possibility to detect two simultaneous touches, as well as front lighting controllable in 64 steps. Powered by ESP32, you will have strong microcontroller with WiFi and Bluetooth on your disposal. Using our Arduino library, it's 5 minute job to get the board running for you. It's 100% open-source for both software and hardware.
• a 6.0 inch, 1024x758 pixel e-paper display with support for greyscale, partial updates, and accelerated refresh cycles
• touchscreen with support for two simultaneous touches
• front-lighting controllable in 64 steps
• an on-board ESP32 microcontroller with integrated Wi-Fi and Bluetooth 4.0 (BLE)
• extremely low-energy, battery- or USB-powered operation (including a 22 µA sleep state) that wrings days, weeks, or months out of a single charge, as well as charger for that battery
• a microSD card reader from which Inkplate 10 can pull images to display
• three capacitive touch pads
• a form factor that's optimized for the design of custom enclosures
• additional GPIO pins, easyC/Qwiic compatibility, and support for I²C and SPI
• Arduino libraries (100% compatible with Adafruit GFX) and a MicroPython module (work in progress!) that facilitate the rendering of text, images, and line art
• Comes without enclosure
• Dimensions: 155 x 112 x 10mm
Please note: some of the Inkplates might come without 1 piece of MCP23017 IO expander. That IC does not limit any Inkplate functionality, only reduces number of IO pins. Due to component shortage, we are having very hard time sourcing those. We are sorry for this and we will provide 10% discount with those Inkplate boards.
We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).
Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.
- Description
-
Details
If you’re like us, the first time you saw an e-reader, you thought to yourself, "I could do something with that." Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the contents of the screen, e-paper is uniquely suited to many applications. Following Inkplate 6 and 10 success, with Inkplate 6PLUS we continue to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino. 6PLUS adds touchscreen and frontlighting, making it a perfect solution for interactive projects.
To name a few features, Inkplate 6PLUS has stunning 6.0 inch e-paper display with refresh rate of 1.27s, greyscale mode and partial updates support. Additionally, it had touchscreen with possibility to detect two simultaneous touches, as well as front lighting controllable in 64 steps. Powered by ESP32, you will have strong microcontroller with WiFi and Bluetooth on your disposal. Using our Arduino library, it's 5 minute job to get the board running for you. It's 100% open-source for both software and hardware.
• a 6.0 inch, 1024x758 pixel e-paper display with support for greyscale, partial updates, and accelerated refresh cycles
• touchscreen with support for two simultaneous touches
• front-lighting controllable in 64 steps
• an on-board ESP32 microcontroller with integrated Wi-Fi and Bluetooth 4.0 (BLE)
• extremely low-energy, battery- or USB-powered operation (including a 22 µA sleep state) that wrings days, weeks, or months out of a single charge, as well as charger for that battery
• a microSD card reader from which Inkplate 10 can pull images to display
• three capacitive touch pads
• a form factor that's optimized for the design of custom enclosures
• additional GPIO pins, easyC/Qwiic compatibility, and support for I²C and SPI
• Arduino libraries (100% compatible with Adafruit GFX) and a MicroPython module (work in progress!) that facilitate the rendering of text, images, and line art
• Comes without enclosure
• Dimensions: 155 x 112 x 10mmPlease note: some of the Inkplates might come without 1 piece of MCP23017 IO expander. That IC does not limit any Inkplate functionality, only reduces number of IO pins. Due to component shortage, we are having very hard time sourcing those. We are sorry for this and we will provide 10% discount with those Inkplate boards.
- Additional Information
-
Additional Information
quantity for 1 pc Project1 Open-source files project-link1 https://github.com/e-radionicacom/Inkplate-6PLUS-hardware Project2 Arduino library project-link2 https://github.com/e-radionicacom/Inkplate-Arduino-library Project3 Micropython project-link3 https://github.com/e-radionicacom/Inkplate-micropython Tutorial1 Documentation tutorial_link1 https://inkplate.readthedocs.io/en/latest/index.html Tutorial2 Getting started tutorial_link2 https://inkplate.readthedocs.io/en/latest/get-started.html Tutorial3 No tutorial_link3 No