Filter
Second filter
Third filter
Fourth filter

Breakout boards

This category contains all the breakout boards from our offer. A sensor breakout or just an adapter of a specific connector, you can find them here.

Showing all 10 results

Sort by:
DC connector breakout
DC connector breakout

Simple breakout that allows access to standard 2.4 mm pins of a DC connector.

USB-C female connector breakout
USB-C female connector breakout

The USB Type-C is ubiquitous. We always wanted to add it to our electronics projects, and we’re sure you did too. Adding a USB Type-C connector to your projects is easier than ever thanks to this USB Type-C breakout board. It will allow you to send data to your device, as well as add power to the circuit.

 

The USB Type-C connector’s GND, CC2, SBU2, D-, D+, SBU1, CC1, and VUSB pins are broken out to the plated through-holes.

 

Product usage tips:

 

Male headers that are included need to be soldered to the board. The breakout board has two mounting holes and can be placed on any surface.

MicroUSB female connector breakout
MicroUSB female connector breakout

The MicroUSB is still everywhere around us, even though it’s slowly being replaced with USB Type-C. We’re sure you wanted to add it to your electronics projects. We did, too, that’s why we added the MicroUSB female connector breakout board to our roster!

 

The Micro B USB connector’s GND, ID, D+, D-, and VCC pins are broken out to the plated through-holes.

 

Product usage tips:

The pins included need to be soldered to the board. It won’t move an inch when mounted with the two mounting holes.

USB Type A female breakout
USB Type A female breakout

The USB Type-A connection is still prevalent. If it’s in the electronic devices everywhere around us, it is only natural that we’d want it in our electronic projects. Adding a USB Type-A connection to your circuit is as easy as pie with this breakout board.

 

The breakout board breaks the GND, D+, D-, and VUSB pins out to the plated through-holes.

 

Dimensions: 22 mm x 22 mm
Connectors: USB Type-A (female)
Mounting holes: 2

USB Type A male breakout
USB Type A male breakout

The USB Type-A connection is still prevalent. If it’s in the electronic devices everywhere around us, it is only natural that we’d want it in our electronic projects. Adding a USB Type-A connection to your circuit is as easy as pie with this breakout board.

 

The breakout board breaks the GND, D+, D-, and VUSB pins out to the plated through-holes.

 

Product usage tips:

Male headers for the pads are added and need to be soldered. The breakout board has two mounting holes for placing it on different surfaces.

3.5mm Jack breakout
3.5mm Jack breakout

If you are working with audio and need easy access to all the pins of the 3.5mm connector, this breakout makes it possible. It accepts a male 3.5mm connector, in a 4-pin version, and allows access to all connector pins on the header.

 

Dimensions: 22 mm x 22 mm
Board connector: 3.5mm female, accepts 3.5mm male
Connections: ground, speaker right, speaker left, microphone
Mounting holes: 2

Digipot 100k MCP4018 breakout
Digipot 100k MCP4018 breakout

A digital potentiometer is a device identical to a potentiometer, except that instead of a physical rotating part that adjusts the resistance, it uses digital communication. Namely, the resistance of the digital potentiometer is adjusted via I2C communication.

Our module is based on the MCP4018 IC which has a total of 128 steps between 0 and 100k resistance values. This would mean that it is capable of doing resistance steps of approximately 781 ohms. It is controlled via I2C which makes it extremely easy to use.

 

Digipot 10k MCP4018 breakout
Digipot 10k MCP4018 breakout

A digital potentiometer is a device identical to a potentiometer, except that instead of a physical rotating part that adjusts the resistance, it uses digital communication. Namely, the resistance of the digital potentiometer is adjusted via I2C communication.

Our module is based on the MCP4018 IC which has a total of 128 steps between 0 and 10k resistance values. This would mean that it is capable of doing resistance steps of approximately 78ohms. It is controlled via I2C which makes it extremely easy to use.

Digipot 50k MCP4018 breakout
Digipot 50k MCP4018 breakout

A digital potentiometer is a device identical to a potentiometer, except that instead of a physical rotating part that adjusts the resistance, it uses digital communication. Namely, the resistance of the digital potentiometer is adjusted via I2C communication.

Our module is based on the MCP4018 IC which has a total of 128 steps between 0 and 50k resistance values. This would mean that it is capable of doing resistance steps of approximately 390ohms. It is controlled via I2C which makes it extremely easy to use.

Digipot 5k MCP4018 breakout
Digipot 5k MCP4018 breakout

A digital potentiometer is a device identical to a potentiometer, except that instead of a physical rotating part that adjusts the resistance, it uses digital communication. Namely, the resistance of the digital potentiometer is adjusted via I2C communication.

Our module is based on the MCP4018 IC which has a total of 128 steps between 0 and 5k resistance values. This would mean that it is capable of doing resistance steps of approximately 39ohms. It is controlled via I2C which makes it extremely easy to use.

items per page