- DASDUINO
- INKPLATE
- easyC
- RASPBERRY PI & MICRO:BIT
- 3D PRINTING
- BREADBOARDS & CABLES
- POWER SOURCES & BATTERIES
- SENSORS
- ACTUATORS
- COMMUNICATION
- TOOLS & LAB EQUIPMENT
- SOLDERING KITS
- COMPONENTS
- CLEARANCE
- Home /
- Raspberry Pi 3B+ Power over Ethernet (PoE) HAT
The Raspberry Pi 3B+ can be powered with this HAT via an Ethernet cable using the PoE (Power over Ethernet) standard.
This HAT uses the PoE 802.3af standard which means that a maximum of 15W can be delivered to the Raspberry.
The HAT is compact, meaning it will fit in the official case for the Raspberry Pi 3B +. The PoE HAT also sports a fan for additional cooling.
Since the fan is controlled via I2C, all 40 GPIO pins can still be used.
The PoE extension is a good choice when you plan to use the Raspberry where it cannot be powered via a USB cable.
HAT size: 65 mm x 56.5 mm
Compatibility: Raspberry Pi 3B+ + and later models
PoE standard: 802.3af PoE
Fan size: 25mm x 25mm
Input: 36 V - 56 V
Output: 5 V
Strength: 2.5 A
We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).
Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.
- Description
-
Details
The Raspberry Pi 3B+ can be powered with this HAT via an Ethernet cable using the PoE (Power over Ethernet) standard.
This HAT uses the PoE 802.3af standard which means that a maximum of 15W can be delivered to the Raspberry.
The HAT is compact, meaning it will fit in the official case for the Raspberry Pi 3B +. The PoE HAT also sports a fan for additional cooling.
Since the fan is controlled via I2C, all 40 GPIO pins can still be used.
The PoE extension is a good choice when you plan to use the Raspberry where it cannot be powered via a USB cable.
HAT size: 65 mm x 56.5 mm
Compatibility: Raspberry Pi 3B+ + and later models
PoE standard: 802.3af PoE
Fan size: 25mm x 25mm
Input: 36 V - 56 V
Output: 5 V
Strength: 2.5 A - Additional Information
-
Additional Information
quantity for 1 pc Project1 No project-link1 No Project2 No project-link2 No Project3 No project-link3 No Tutorial1 No tutorial_link1 No Tutorial2 No tutorial_link2 No Tutorial3 No tutorial_link3 No