Filter
Second filter
Third filter
Fourth filter

Raspberry Pi

In this category you can find Raspberry Pi microcomputers with corresponding accessories. Power supplies, keyboard and mouse for Raspberry Pi, etc.

Showing all 19 results

Sort by:
Raspberry Pi easyC adapter
Raspberry Pi easyC adapter

This adapter makes it easy to connect easyC devices and sensors to the Raspberry Pi. It has 3 pieces of easyC connectors and a female header for Raspberry Pi, next to the header there are pins for connecting 5V and 3.3V and ground pins. It simply connects to the Raspberry Pi because its pinout matches the pinout of the Raspberry Pi.

Raspberry Pi 4 B 2GB
Raspberry Pi 4 B 2GB

A new and more powerful Raspberry Pi 4 is here! The most famous little computer in the world that doesn’t need any introduction. The 87 x 58mm board features a 64-bit 4-core processor clocked at 1.5GHz, 2GB of RAM, WiFi and Bluetooth, Gigabit Ethernet, 2x HDMI output, 4 USB ports, an SD card slot for system sotrage and your data. One should not forget the well-known Raspberry Pi GPIO, which allows you to connect various accessories directly to the Raspberry Pi.

 

Out of stock Raspberry Pi 4 B 4GB
Raspberry Pi 4 B 4GB

A new and more powerful Raspberry Pi 4 is here! The most famous little computer in the world that doesn’t need any introduction. The 87 x 58mm board features a 64-bit 4-core processor clocked at 1.5GHz, 4GB of RAM, WiFi and Bluetooth, Gigabit Ethernet, 2x HDMI output, 4 USB ports, an SD card slot for system sotrage and your data. One should not forget the well-known Raspberry Pi GPIO, which allows you to connect various accessories directly to the Raspberry Pi.

 

Power supply 5V 3A 15W with microUSB connector
Power supply 5V 3A 15W with microUSB connector

A small power supply that provides 3A on 5V via micro-USB cable. You might recognize, this is a perfect power supply for the Raspberry Pi. It would also find its place in some other uses, such as powering up a micro-USB device or charging a device with a battery.

 

Out of stock Power supply 5V 3A 15W with USB-C connector
Power supply 5V 3A 15W with USB-C connector

A classic small power supply with an output of 5V, 3A that will ideally power your project in which you use an Arduino / Dasduino or any other device. It has a standard female USB-C connector on the output. You can connect the cable from the board directly to this charger and use it as a constant power source. Furthermore, you can use it to charge your cell phone / tablet. Or for a third purpose …? Either way, it will serve you well!

Plastic Raspberry Pi 4 B+ case
Plastic Raspberry Pi 4 B+ case

This Raspberry Pi case is designed for the classic full-sized Raspberry Pi. With this case, your Raspberry Pi is safe from external sources and possible damage. It also provides easy access to all connections and GPIO pins.

microSD card 32GB
microSD card 32GB

It’s a good idea to pick up Raspberry Pi and a card for his operating system right from one place, so we started to offer microSD cards.

• microSD card
Capacity: 32GB

Raspberry Pi easyC adapter
Raspberry Pi easyC adapter

This adapter makes it easy to connect easyC devices and sensors to the Raspberry Pi. It has 2 soldered easyC male connectors and a female header for Raspberry Pi, next to the header there are pins for connecting 5V and 3.3V and ground pins. It simply connects to the Raspberry Pi because its pinout matches the pinout of the Raspberry Pi.

Raspberry Pi breadboard breakout + cable
Raspberry Pi breadboard breakout + cable

With the Raspberry Pi breadboard breakout board, you can easily connect your Raspberry Pi with a regular breadboard. It fits on standard half-size and full-size breadboards. It even adds a couple of ground and power supply pins. Best of all, the pins are already soldered. You just have to plug the cable in. This breakout will get you prototyping on the Raspberry Pi in no time!

 

Product usage tips:

The breakout board is compatible with Raspberry Pi that comes with 40-pin connector. It comes with a HAT ribbon cable for the Raspberry Pi. It has an easyC port for easier connection with other I2C breakout boards.

 

If the breakout board is not working properly, it’s likely not connected correctly. Check the pinout and the wiring. The culprit might be there. If that’s not the case, check if the HAT ribbon cable is connected as it should be. It should be straight and go to the bottom of the pins.

Raspberry Pi GPIO cable
Raspberry Pi GPIO cable

The Raspberry Pi cable provides direct connectivity to the Raspberry GPIO port and then easily accesses all plug-ins or adapters.

Micro HDMI to HDMI adapter
Micro HDMI to HDMI adapter

This adapter will turn your Micro HDMI into an HDMI connector. On one side there is a male Micro HDMI and on the opposite side is a female HDMI connector .

Micro HDMI to HDMI cable 1m
Micro HDMI to HDMI cable 1m

This adapter will convert your Micro HDMI to HDMI port. There is a male Micro HDMI on one side and a HDMI port on the other.

 

• Connector side A: micro HDMI
• Connector side B: HDMI
• Cable length: 1m

HDMI cable 0.3m
HDMI cable 0.3m

HDMI cable we offer because it is needed for connection on Raspberry Pi with the outer monitor. This is classic male-male HDMI cable. This cable is extremely short almost 20cm and it will find an application on small LCD screens for Raspberry.

 

• Lenght: 0.3m

Mini HDMI to HDMI adapter
Mini HDMI to HDMI adapter

This adapter will turn your Mini HDMI into an HDMI connector. On one side there is a male Mini HDMI and on the opposite side is a female HDMI connector.

HDMI cable 1m
HDMI cable 1m

We all know what HDMI cable is and we offer it because it’s required to connect Raspberry Pi with an external monitor. This is a classic male-male HDMI cable.

Length: 1m

HDMI to VGA adapter
HDMI to VGA adapter

This adapter will turn your HDMI into an VGA connector. On one side there is a male HDMI and on the opposite side is a female VGA connector.

MicroUSB to USB-C adapter
MicroUSB to USB-C adapter

This adapter can switches your MicroUSB cabel into an USB-C.

 

Front: MicroUSB
• Back: USB-C

USB SD card reader
USB SD card reader

This This USB SD adaptor allows you to read and write on varios types of SD cards: Micro MS, SD, MIcroSD, MS Duo.

 

Card models: Micro MS(M2), SD/MMC/SDHC/DV, MS Duo/MS PRO Duo, Micro SD/T – Flash
• Dimensions: 69 x 20.5 x 16mm

USB WiFi adapter
USB WiFi adapter

If your device lacks WiFi, connect this device to USB and the problem is solder! WiFi USB adapter works on all major operating systems. It comes with an external SMA antenna that you can also unplug and connect a stronger antenna if required.

items per page