Filter
Second filter
Third filter
Fourth filter

Soldering kits

This category includes the soldering learning sets that we offer. You will learn to solder while putting together games like Simon Says / Stop me game.

Showing all 5 results

Sort by:
Make your own Dasduino Solder Kit
Make your own Dasduino Solder Kit

If you’re looking for a simple way to start soldering or just want to make your own Dasduino, this soldering set is a great opportunity. “Make your own Dasduino CORE” is an educational set for learning the skill of soldering, with which you end up with a functional microcontroller board. As with the other SMD versions of the Dasduino CORE boards we offer, the possibilities are endless.

 

 

It is based on the ATmega328P microcontroller, and all SMD components are already soldered on the board. The set also includes a THT socket for the microcontroller, which simplifies the replacement of the microcontroller should it ever become necessary.

 

 

The set consists of:

  • PCB
  • 7 capacitors of 100nF
  • 4 capacitors of 2.2uF
  • 2 capacitors of 22pF
  • 5 resistors of 2.2kOhm
  • 5 resistors of 10kOhm
  • 3 resistors of 1kOhm
  • 1 resistor of 100kOhm
  • 1 resistor of 100Ohm
  • 1 JST battery connector
  • 1 purple LED
  • 1 white LED
  • 1 blue LED
  • 1 red LED
  • 1 orange LED
  • 1 socket for ATmega328P
  • 1 ATmega328P microcontroller
LED dice Solder kit
LED dice Solder kit

If you are looking for an easy way to get started with soldering or simply want to make a small portable gadget, this set is a great opportunity. “LED cube” is an educational set for learning the soldering skill, with which you get a small electronic game at the end. After you turn on and shake this board, certain leds will light up randomly and symbolize the number, as if a real die had been thrown.

 

It is based on the Attiny404 microcontroller, programmed in Arduino, and there is a battery on the back which makes this gadget portable. There is also a keychain so you can always carry your new game with you! Soldering is easy according to the markings on the board.

 

The kit consists of:

  • PCB
  • Attiny404 microcontroller
  • 7 LEDs
  • 7 330ohm resistors
  • 1 10kohm resistor
  • Battery holder
  • CR2032 battery
  • Switch
  • Vibration sensor SW-18020P
  • Keychain ring
Out of stock Simon says game Solder Kit
Simon says game Solder Kit

If you are looking for a simple way to learn soldering, or just want to make a small gadget that you can carry, this soldering kit is a great opportunity. Simon says game is an educational kit which teaches you how to solder, and in the end, you get to have your own small game. The goal of the game is to press the buttons in the same order as LED turn on. With every correct answer, the game gets a bit harder. How many correct answers can you get?

 

It’s based on Attiny404 microcontroller, programmed in Arduino. At its back, you’ll find CR2032 battery which makes the kit portable. There’s keychain holder as well. Soldering process is easy enough based on the mark on the PCB.

 

The kit consists of:
• PCB
• Attiny404 microcontroller
• 4 LEDs
• 4 Pushbuttons
• A switch
• 4 resistors 330ohm
• CR2032 battery holder
• Battery CR2032
• Keychain holder

Stop Me game Solder kit
Stop Me game Solder kit

If you are looking for a simple way to learn soldering, or just want to make a small gadget that you can carry, this set is a great opportunity. Stop me game is an educational kit which teaches you how to solder, and in the end, you get to have your own small game. The LEDs go up and down, and your goal is to press the button as soon as the green LED turns on. With every correct answer, the game gets a bit harder – the time you have to press the button shortens. How many correct answers can you get?

 

It’s based on Attiny404 microcontroller, programmed in Arduino. At its back, you’ll find CR2032 battery which makes the kit portable. There’s keychain holder as well. Soldering process is easy enough based on the mark on the PCB.

 

The kit consists of:
• PCB
• Attiny404 microcontroller
• 7 LEDs
• A pushbutton
• A switch
• 7 resistors 330ohm
• CR2032 battery holder
• Battery CR2032
• Keychain holder

Reaction game Solder kit
Reaction game Solder kit

If you are looking for a simple way to learn soldering, or just want to make a small gadget that you can carry, this set is a great opportunity. Reaction game is an educational kit which teaches you how to solder, and in the end, you get to have your own small game. The goal of the game is to press the button next to the LED as soon as it turns on. With every correct answer, the game gets a bit harder – the time you have to press the button shortens. How many correct answers can you get?

 

It’s based on Attiny404 microcontroller, programmed in Arduino. At its back, you’ll find CR2032 battery which makes the kit portable. There’s keychain holder as well. Soldering process is easy enough based on the mark on the PCB.

 

The kit consists of:
• PCB
• Attiny404 microcontroller
• 4 LEDs
• 4 Pushbuttons
• A switch
• 4 resistors 330ohm
• CR2032 battery holder
• Battery CR2032
• Keychain holder

items per page