• Worldwide Shipping

  • 24/7 Customer Support

  • FAQ
  • Worldwide Shipping

  • 24/7 Customer Support

  • FAQ

STM32L microcontroller board with LoRa transceiver and SMA connector

Name STM32L microcontroller board with LoRa transceiver and SMA connector
Price
€27.83 0.49 EUR
  • Buy 10 for €26.16 each and save 6%
  • Buy 50 for €24.77 each and save 11%
  • Buy 100 for €23.65 each and save 15%
(for 1 pcs)
SKU222246

MOQ: 1 piece

This board allows communication with LoRa protocol via STM32L microcontroller. STM32L is a powerfull 32-bit microcontroller with low power consumption and with 64kB flash memory and 8kB RAM memory, set to work on 16MHz. It contains lots of hardware: 12-bit ADC, SPI, UART, ICA, 7 timers... Board does not come with bootloader, so you need to use a standard STLINK Programmer to put a new code on a microcontroller.


 


Except STM32L, there is RFM95W LoRa transciver. Thanks to it this board can send and recieve data from LoRa gateway or from the other board like this. To reach maximum distance there is an SMA connector to connect your antennas. Board has a connector and charger for a standard li-ion battery. A very important thing about LoRa is the low power consumption, and this board definitely makes it possible: the power consumption in the sleep state is only 4.5μA.


 


This board comes with soldered easyC adapter and enables simple connections. You can find more about easyC at this link.


 


Microcontroller: STM32L010RBT6
Memory: 64kB flash, 8kB RAM
• Lithium battery charger
• Deep sleep current: 4.5μA
• Frequency: 868MHz (Europe)
• Voltage
: 3.3V
• Dimensions: 85 x 29 x 7mm

OR
Description

This board allows communication with LoRa protocol via STM32L microcontroller. STM32L is a powerfull 32-bit microcontroller with low power consumption and with 64kB flash memory and 8kB RAM memory, set to work on 16MHz. It contains lots of hardware: 12-bit ADC, SPI, UART, ICA, 7 timers... Board does not come with bootloader, so you need to use a standard STLINK Programmer to put a new code on a microcontroller.

 

Except STM32L, there is RFM95W LoRa transciver. Thanks to it this board can send and recieve data from LoRa gateway or from the other board like this. To reach maximum distance there is an SMA connector to connect your antennas. Board has a connector and charger for a standard li-ion battery. A very important thing about LoRa is the low power consumption, and this board definitely makes it possible: the power consumption in the sleep state is only 4.5μA.

 

This board comes with soldered easyC adapter and enables simple connections. You can find more about easyC at this link.

 

Microcontroller: STM32L010RBT6
Memory: 64kB flash, 8kB RAM
• Lithium battery charger
• Deep sleep current: 4.5μA
• Frequency: 868MHz (Europe)
• Voltage
: 3.3V
• Dimensions: 85 x 29 x 7mm

Tier Pricing
5
€26.16
€24.77
€23.65
Available in stock
10+ units
50+ units
100+ units
SHIPPING & RETURNS

We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).

Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.

Description

Details

This board allows communication with LoRa protocol via STM32L microcontroller. STM32L is a powerfull 32-bit microcontroller with low power consumption and with 64kB flash memory and 8kB RAM memory, set to work on 16MHz. It contains lots of hardware: 12-bit ADC, SPI, UART, ICA, 7 timers... Board does not come with bootloader, so you need to use a standard STLINK Programmer to put a new code on a microcontroller.

 

Except STM32L, there is RFM95W LoRa transciver. Thanks to it this board can send and recieve data from LoRa gateway or from the other board like this. To reach maximum distance there is an SMA connector to connect your antennas. Board has a connector and charger for a standard li-ion battery. A very important thing about LoRa is the low power consumption, and this board definitely makes it possible: the power consumption in the sleep state is only 4.5μA.

 

This board comes with soldered easyC adapter and enables simple connections. You can find more about easyC at this link.

 

Microcontroller: STM32L010RBT6
Memory: 64kB flash, 8kB RAM
• Lithium battery charger
• Deep sleep current: 4.5μA
• Frequency: 868MHz (Europe)
• Voltage
: 3.3V
• Dimensions: 85 x 29 x 7mm

Additional Information

Additional Information

quantity for 1 pcs
Project1 Datasheet LoRa
project-link1 https://e-radionica.com/productdata/Lora-RFM95W-868S2.pdf
Project2 Datasheet STM32L
project-link2 https://e-radionica.com/productdata/STM32L010RBT6.pdf
Project3 No
project-link3 No
Tutorial1 No
tutorial_link1 No
Tutorial2 No
tutorial_link2 No
Tutorial3 No
tutorial_link3 No