This little adapter converts USB communication in UART using Silabsov CP2102. Everything is packed on a small plate In addition to standard UART pins separated in standard schedule: DTR, RXD, TXD, VCC, CTS, GND are isolated and other pins available on the chip CP2102: RST, Suspend, Suspend ', RI, DCD, DSR , RTS, CTS.
In addition, the board is a voltage regulator and a switch, and it is possible to determine the output voltage of 3.3V or 5V, depending on the device you are using. Logic UART signal is always 3.3V, but do not worry, 5V devices will work without problems. There are also three LEDs, one for power indicator and one for each direction of UART communication.
• Dimensions: 25 x 35 mm
• USB - UART bridge: CP2102
• Input voltage: 5V (USB)
• Output voltage: 3.3V ili 5V
• Logic of UART signal: 3.3V
We ship internationally via Croatian Post or GLS express service for Europe. GLS express will deliver your package within few workdays(depends on location) and provide you tracking number. Croatian Post shipping is without tracking and might take up to 14 workdays to deliver for Europe and up to 30 workdays to deliver for rest of the world(but usually delivers under 3 weeks).
Returns are accepted in 14 workdays after purchase as long as the product is in original undamaged packaging.
- Description
-
Details
This little adapter converts USB communication in UART using Silabsov CP2102. Everything is packed on a small plate In addition to standard UART pins separated in standard schedule: DTR, RXD, TXD, VCC, CTS, GND are isolated and other pins available on the chip CP2102: RST, Suspend, Suspend ', RI, DCD, DSR , RTS, CTS. In addition, the board is a voltage regulator and a switch, and it is possible to determine the output voltage of 3.3V or 5V, depending on the device you are using. Logic UART signal is always 3.3V, but do not worry, 5V devices will work without problems. There are also three LEDs, one for power indicator and one for each direction of UART communication.• Dimensions: 25 x 35 mm
• USB - UART bridge: CP2102
• Input voltage: 5V (USB)
• Output voltage: 3.3V ili 5V
• Logic of UART signal: 3.3V - Additional Information
-
Additional Information
pcs za 1 kom discount No Sale No quantity for 1 pc Project1 Open-source files project-link1 https://github.com/e-radionicacom/CP2102-USB-UART-converter-Eagle-Files Project2 No project-link2 No Project3 No project-link3 No Tutorial1 Instalacija drivera tutorial_link1 https://e-radionica.com/blog/2015/10/09/croduino2-i-cp2102-driveri/ Tutorial2 No tutorial_link2 No Tutorial3 No tutorial_link3 No